Ball Valve Manufacturer in Narmada

Product Description

FlowBiz Exports - Ball Valve Manufacturer

FlowBiz Exports is a Ball Valve Manufacturer in Narmada, Gujarat, India. We are a top manufacturer of Ball Valve.

Ball design

FlowBiz Exports' Most common design is the "floating ball design." The ball is suspended in the media and held in place by two sealing rings. Some high-quality valves have a trunnion ball design. The ball is supported at the top and bottom to reduce the load on the valve seats.

Trunnion: Valves with large diameters and high operating pressures (DN >100mm and 30 bar) often have a trunnion design. The ball is supported on the bottom and top to reduce the load on the seat rings. The operating torque is generally lower for trunnion valves.

Floating: The majority of ball valves have a floating ball. The valve seats support the ball.

One-piece: This is the cheapest variant. The two parts which enclose the ball are pressed or welded. The valves can not be opened for cleaning or maintenance. This type is generally used for low-demanding applications.

Two-piece: Two-piece valves can be disassembled for cleaning, servicing, and inspection. Often, the parts are connected via a threaded connection. The valve must be removed entirely from the pipe to separate the two parts.

Three-piece: More expensive valves often have often have three pieces. Bolt connections generally clamp the parts together. The advantage of this embodiment is that the valve can be serviced without removing the entire valve from the pipeline.