Gas Solenoid Valve

Price 11000 INR/ Number

Get a Price/Quote

MOQ : 1 Unit

Gas Solenoid Valve Specification

Valve Type
Solenoid

Material
Brass body Stainless steel actuator

Connection Type
Thread

Features
Compact design High performance

Control System
Solenoid

Valve Size
1/2 inch

Structure
Direct acting

Voltage
12V DC

Sealing
Rubber gasket

Application
Gas

Type
Normally closed

Power
12V DC

Pressure
0-0.6 MPa

Media
Gas

Port Size
1/2 inch

Temperature
-10C to 80C

Pin
2-pin connector

About Gas Solenoid Valve

Port : Refer below technical data sheet (Available BSP)

End Connection : Screwed

Body Material : Aluminum Pressure Die Cast

Circumstance Temp : -10C to 70C

Media : Air, Natural Gas, Town Gas

Main Features : Flow adjustment, Opening time adjustment,

Quick release initial flow adjustment

Coil Features : High Reliability Unaffected by Voltage Surges.

Easy coil changes coil lockable in 4X90 position or freely movable in

between as require.

Coil Housing : Epoxy square coil

Other Specification Data : Available on Request

High-Performance Direct-Acting Gas Valve

Built for reliability, the solenoid valve employs a direct-acting mechanism suitable for low-pressure gas systems. Its normally closed type ensures that gas flows only when electrically activated, providing an added layer of safety. This design, together with a robust brass and stainless steel construction, makes it ideal for demanding scenarios across various gas distribution setups.

Versatile Application Across Industries

This gas solenoid valve is engineered for versatile use, fitting both residential and industrial applications. Its 1/2-inch threaded port allows for straightforward integration into existing pipelines. The compact architecture and high-quality sealing ensure leak-proof operation, making it a preferred choice for precise gas flow management.

FAQ's of Gas Solenoid Valve:

Q: How does the gas solenoid valve operate?

A: The solenoid valve uses a direct-acting mechanism controlled by a 12V DC electrical signal. In its normal state, the valve remains closed, blocking gas flow. When powered, the solenoid actuator lifts, opening the valve to allow gas to pass through, thus providing fast and precise control.

Q: What types of gases can this valve be used for?

A: This solenoid valve is suitable for a variety of non-corrosive gases typically used in residential and industrial systems. Its durable brass and stainless steel components ensure compatibility with gases like natural gas, LPG, and other similar media.

Q: When should this valve be installed in a gas pipeline system?

A: Install this valve when you require automated or remote-controlled regulation of gas flow, particularly for safety shut-off or timed distribution. It is ideal in systems where monitoring or controlling gas manually is impractical or unsafe.

Q: Where is the optimal place to install the solenoid valve?

A: For efficient operation, install the valve at accessible, upstream sections of your gas pipeline, close to the source or critical section requiring flow control. Ensure the port size and threaded connection match your pipeline specifications.

Q: What is the process for maintaining this solenoid valve?

A: Regularly inspect the valve for any signs of wear or leakage, especially the rubber gasket and threads. Periodically check the electrical connections and ensure there is no debris in the valve port to maintain optimal performance.

Q: What are the primary benefits of using this solenoid valve?

A: This valve's compact design, high-performance capabilities, and robust construction deliver precise gas control, reliable sealing, and a long service life, enhancing system safety and efficiency in both industrial and residential setups.

Tell us about your requirement